Craft & paper
Free Papercraft & Cards vector files
Kirigami cards, pop-ups and delicate silhouettes.
- 0 files
Paper punishes hesitation. These files are drawn for a fast, low-power pass on 200–300 gsm card with bridges no thinner than 0.6 mm and no acute internal angles where the beam would linger and scorch.
On a diode machine, run the outline at 400 mm/min and 25 % power on 250 gsm and test on a corner first. Air assist low, honeycomb bed clean, and a sheet of sacrificial paper underneath stops back-reflection marks.
Every card file includes the fold line on a separate SCORE layer, set to a dashed stroke so it is unmistakable in the preview and easy to assign a lower power in your laser software.
Nothing matched that combination
Try removing a filter.
Papercraft & Cards — questions we get
2 answers01Why are my paper edges browning?
Too much power for too long. Increase speed and reduce power rather than doing two passes, keep air assist on low, and make sure the sheet is flat against the honeycomb.
02Can a vinyl cutter run these files?
Yes for the SVG and EPS variants on card up to 250 gsm. Set the blade offset to 0.25 mm and use the SCORE layer as a kiss-cut for the folds.