Laser cutting
Free Jewelry & Earrings vector files
Filigree drops, pendants and stackable charms.
- 0 files
Jewelry rewards a fine kerf. These files assume a 0.10–0.15 mm beam and are drawn with a minimum bridge of 0.8 mm, which survives in 3 mm acrylic and in hardwood ply if the grain cooperates.
Holes are sized for standard findings: 1.6 mm for jump rings, 2.4 mm for ear hooks and 4 mm for cord. Scale the whole design and those holes scale with it, so re-drill or re-cut findings after any resize.
Cut mirrored pairs in one pass with the material masked on both sides. The masking keeps smoke off the face and stops the tiny drop-outs from tipping up and catching the head.
Nothing matched that combination
Try removing a filter.
Jewelry & Earrings — questions we get
2 answers01Which material gives the cleanest filigree?
Cast acrylic at 3 mm. It cuts with a polished edge and no scorching. Bamboo ply is the next best option — it is dense and holds a 0.8 mm bridge better than birch.
02Can I cut these on a diode laser?
Yes for wood and leather at 5–10 W. Clear and white acrylic will not cut on a blue diode; use black, opaque or fluorescent cast acrylic instead.